NEW! Drake 19

On the Drawing Board

New Drake 19 for tandem rowing, cruising and expeditions

For Fixed Seat or Sliding Seat Rowing

This new version of the Drake Rowboat -- my first design/build project -- really combines all that I have learned as a designer and rower and builder over the years. She is intended with the following brief:

-- fast, stable cruising rowboat

--capacity for two people and gear

--fixed or sliding seat capable

--can sleep aboard on platform under a tent 

--sailing downwind is possible

Drake 19 modeled in Rhino

An important aspect of the boat is its simple sliding seat system : 7/8" o.d. stainless steel pipes run for and aft with 15" of separation on center. The pipes are integrate into the CNC cut structure. A plywood seat-roller floats over these pipes. Any oarlock system can be used, including leathered-round oars, Douglas oarloacks, C2 oarlocks, or the folding outriggers by Shaw and Tenney. However, I think for voyaging in open water that oar-on-gunwale will be the best way, using traditionally leathered oars in horn-oarlocks or to go with pinned oars. I do think 9-9 1/2' oars would be fine for experienced rowers, using folding outriggers to get the spread for the longer oars.

Midship section of the Drake 19 showing the sliding seat system.

The floorboards are show both sitting on the inner keel as floors and raised up and sitting on the pipes to make an over 8' long sleeping platform that finishes flush with the side tanks. These side tanks double as a sleeping platform and as flotation, making the boat self-rescuable in a capsize. 

Keep posted for 3D work which starts very soon.

Related Posts by Categories